A community-kept guide to Juno New Origins XML Modding
|Name|Type|Description|
|–|–|–|
|bayLength|float|Changes the length of the landing gear bay|
|bayWidth|float|Changes the width of the landing gear bay|
|brakeTorque|float|Changes the torque applied to the wheel when brake is applied.|
|damperScale|float|Higher damper settings can help to reduce oscillation. Lower damper settings allow more oscillation.|
|extended|Nullable1||
|extensionPercent|float||
|flipped|bool|Mirrors the offsets of the landing gear|
|forwardOffset|float|Changes the forward offset of the wheel's position|
|gearRatio|float|Higher values result in more torque for the wheel, but lower RPM. Lower values result in less torque, but higher max RPM.|
|heightOffset|float|Changes the height offset of the wheel's position|
|lengthScale|float|Changes the length of the wheel's support rod (does not affect suspension travel).|
|maxTurningAngle|float|Changes max the turning angle of the wheel.|
|retractionSpeed|float|Allows speeding up/slowing down of the wheel's retraction.|
|showUpperBraces|bool|Determines whether the upper braces inside the bay should be hidden.|
|sideOffset|float|Changes the side offset of the wheel's position|
|size|float|Changes the overall size of the landing gear.|
|slantAngle|float|Changes the angle that the lower support attatches to the wheel.|
|soundVolume|float|Changes the volume of the sound made by the motor built into the wheel.|
|springForceScale|float|Changes the strength of the spring force in the suspension.|
|startExtended|bool|Determines whether the gear should start out extended, or retracted.|
|supportArmEnabled|bool|Enables/disables the support arm for the landing gear.|
|suspensionTravel|float|Changes the length (meters) of available suspension travel.|
|torque|float|Changes the power of the wheel, which impacts electricity usage. The value shown is already scaled by the Gear Ratio.|
|tractionForward|float|Changes the forward grip of the wheel.|
|tractionSideways|float|Changes the sideways grip of the wheel.|
|verticalAngleOffset|float`|Changes the vertical angle of the wheel.|